 |
Vacuum bed consisting of a perforated PVC frame and a latex bag.
The 1¼" (3.2 cm) tubes of the frame require no tools to assemble; simply snap them together. The latex sack is then put on the frame via a full length side zipper, with a protective inner flap. Once the body is inside, the air can then be removed using a household vacuum cleaner, which connects to the frame creating a "seal wrap" effect.
The latex cover has three double layer strengthen openings: a ½" (1.3 cm) hole located towards the top to accommodate for a breathing tube, a second one of 1" (2.5 cm) in the center of the bed to access the body and a third one at the lower right frame corner to accommodate for a vacuum nozzle.
The center hole can be covered using the integrated inner latex flap, if desired.
The vacuum rack will adapt to most household vacuums; but if required, your local hardware store can provide the proper fittings. The kit comes in a nylon storage bag.
Thickness: .02" (.4 mm)
The latex cover bag is also available on its own (without the frame).
Measurements:
|
One Size |
Frame Length |
70" |
Frame Width |
44" |
Sack Length |
78" |
Sack Width |
40" |
Zipper Length |
60" |
Customer Appreciation | Entry Level | Recommended | Must Have | Quality | 17% | 33% | 50% | Value | 17% | 50% | 33% | Fun Factor | 17% | 17% | 67% |
314.99 USD |
